Accu-Tech Bronze Cleaning Brush .40 cal

The Lead Sled® FCX combines the two most innovative gun rest technologies in the industry’s most advanced shooting platform. Designed for fast, precise crosshair alignment and smooth function while reducing felt recoil up to 95%. Included is the custom-fit weight bag with carry handle for easy weight transport. The Lead Sled® FCX gives you ultimate accuracy and comfort all in one.

Features:
• Adjust windage and elevations with a single movement
• 4" course elevation adjustment at the rest
• At 100 yards, the control arm provides approximately 5 feet of adjustment on target
• Overall shooting rest length is adjustable
• Contoured rear support protects gunstock's finish
• Carrying bad included

The Lock-N-Load Classic™ is the only single-stage press to feature quick-change dies. If you reload more than one caliber and want the ease and simplicity of a single-stage press, you want Hornady’s Lock-N-Load Classic. The Lock-N-Load Bushings make changing calibers with a single-stage press faster and easier than ever before. Switch from one die to another with just a quick twist, no screwing and unscrewing dies or die adjustments are needed. With the Lock-N-Load Classic, you’ll load more shells in less time than ever before.

Note: The auto primer feed shown in photo is optional, and is sold separately.

FOUR WAYS LOCK-N-LOAD™ CLASSIC CAN IMPROVE YOUR RELOADING:

1) SPEED
Lock-N-Load™ Technology lets you switch dies to a new caliber and begin reloading again in seconds. Automatic priming is hands-off and trouble free. The angled frame gives you easier access to your cartridges.

2) CONSISTENCY
Lock-N-Load Bushings let you adjust your dies once, then lock the setting into place, for consistent reloads every time.

3) PRECISION
The CNC machined die and ram openings create near perfect alignment of the ram and die, so cases are lined up properly with the dies at all times. This precision translates into greater accuracy. The strong, rigid frame also provides the stability necessary for precision reloading.

4) VERSATILITY
With Lock-N-Load, one press can handle multiple calibers with ease. There’s no need to purchase multiple presses so you can leave your dies in place. Your dies will remain exactly as you set them, within their Lock-N-Load Die Bushings.

The Hornady Lock-N-Load Classic Reloading Kit comes with everything you need to turn out high-quality, accurate handloads. You get everything listed here, plus complete instructions. The Hornady Handbook of Cartridge Reloading is especially valuable, with hundreds of rifle and pistol loads for every shooting application.

Negrini’s smallest sporting shotgun cases ever produced. The Ultra-compact blue shotgun case with shoulder strap designed to fit sporting shotguns with barrels up to 32". Tipping the scales at 6.8 lbs, this luxury shotgun hard case is ultra-compact and ultra-light. Fitting any OU/SXS shotgun with barrels up to 32", the Ultra-Compact Sporter is approved for air travel and features a hand-detachable sling system for hands-free use. The Compact Sporter case features a hand upholstered luxury interior and engineered with separate compartments for your stock & receiver and all accessories on one side and storage for the barrel with the forearm on at the top of the gun case. The exterior is finished with a rubber trim and constructed with Negrini’s rigid double-wall composite technology. Case opens 180° for easy access and has 3 TSA-accepted steel combination locks for security.

The NEW Compact Sporter and ultralight gun cases are perfect for air travel, car, club, and home.

Features:

• Color: Dark Blue/Maroon Interior
• Trim: LR – Luxury Rubber trim
• Fits Over/Under and side-by-side shotguns
• Forearm on barrel
• Patented Quick Detach Padded Sling
• Weight: 3.5kg
• Product width(mm): 880
• Product height(mm): 170
• Product depth(mm): 100

The Lead Sled® DFT™ 2 (Dual Frame Technology) provides shooters with the industry’s best recoil reduction system and the versatility to fit virtually any shotgun or rifle, all built around a precision shooting platform. A key feature of the DFT 2 is the ability to slide the front cradle 18" for optimal length adjustment.

Features:

• Dual frame design for maximum recoil mitigation
• 16.5" of adjustment to fit any rifle or shotgun
• Weighs approximately 24 lbs
• Base is 30" long by 12" wide

Carried off the rifle and attached in seconds, the Javelin Pro Hunt features spring-loaded ratchet-style tac legs so hunters can quickly adjust the bipod’s height. The Javelin Pro Hunt is ideal for hunters needing to travel long distances through woodlands and mountainous terrain; it quickly snaps into place via our patented Spartan Magnetic Attachment System and is easily swapped to other rifles, making it the only bipod you’ll ever need. And when the time comes to take your shot, the single button Leg Lock-Out feature opens the legs and ensures they stay in the fixed shooting position.

Features:
• Track targets with the traversing function or use in locked target mode
• Cant facility for uneven surfaces, positions and terrains 
• Low profile adapter makes carrying a slung rifle comfortable
• Rubber and tungsten carbide feet for grip in different environments
• Secure sling attachment 
• Modularly designed to accept a range of different legs for different shooting
• Supplied with storage case and a classic rifle adapter kit
• Compatible with a full range of 12mm Spartan Rifle Adapters

Specifications:
• Weight: 236 g / 8.3 oz
• Materials: Hard anodized 7075 aluminium, multi-layered carbon fibre
• Cant/Pan: Cant - 15 degrees left & right; Pan - 30 degrees left & right
• Ground Clearance: Min - 22.8cm / 8.9"; Max - 31 cm / 12.2" 

Like every Trigger Stick, the new Primos Trigger Stick Gen 3 adjusts to your desired height with just one hand and the pull of a trigger. The new Locking Leg Angles give you more stability at more angles in the field. The new Quick Detach Yoke System with Integrated Lock makes it easier than ever to switch from gun to optics and back again. Smoother panning action helps you rotate, scan and find your perfect shot effortlessly. Its the next level of Trigger Stick to give you the next level of confidence in every shot in all terrain standing, sitting, or kneeling!

Features:

• New Quick Detach Yoke System with Integrated Lock

• Both V-Yoke and Optics/Camera Mount Mount included

• New Leg Angle Lock

• New Contoured Grip with No-Slip Backbone

• Strengthened Rotating Joint for Smooth Panning

• New Heavy Duty look with Dark Earth Accents

• Height adjusts from 24" to 62".

The Negrini Hybri-Tech UNICASE – gun case is a universal shotgun case that converts from an Over and Under or Side by Side shotgun to a Semi-Auto or Pump-Action shotgun case. Max barrel length is 36". Blue shotgun case is hard and made of durable injection-molded polypropylene. The double-wall construction of the UNICASE consists of an outer case welded to a thermoformed inner case. Finished with a plush padded cushioning. The double-wall construction of this universal shotgun case absorbs shock without breaking while protecting the contents of the case. The interior is designed with separate compartments for the barrel and forearm, stock and receiver. In this blue shotgun case, a choke box is included in the universal case design and can be removed for Autoloaders and Pump shotguns. 

The hard shotgun case is convertible for any type of shotgun Browning, Winchester, Caesar Guerini, Beretta, Benelli, Remington & more.

Features:

• Hybri-Tech Case Technology
• Vertical stackable design
• Convertible to fit all Over and Under, Side-by-Side, Autoloader and Pump shotguns
• Recommended for Car/Club & Home
• Combination locks for security

Specifications:

• Product width: 965mm
• Product height: 285mm
• Product depth: 83mm
• Product weight: 3.5kg
• One shotgun: yes
• BARREL LENGTH: 36"/ 930mm
• INTERNAL LENGTH: 935mm
• INTERNAL WIDTH: 240mm
• INTERNAL DEPTH: 65mm

The FAB Defense SPIKE Precision Bipod was designed to deliver the best experience and comfort to any mission via its versatility and smart hybrid construction.

Features:

• Smart hybrid construction, hardened steel, 6061 T-6 aluminum & high performance polymer composite
• 4 locking leg positions: 0, 45, 90 & 135 degrees
• Adjustable rotating head with tilt and pan adjustments that can be locked down or released for quick target tracking
• 60 degree pan movement with a spring loaded mechanism
• 20 degree tilt movement
• Leg height range of 180 mm to 290 mm (height measured at the 90° leg position)
• Quick leg height increase with a simple pull down of the leg extension
• Quick leg height decrease with a push of a button
• Rectangular shaped inner legs for enhanced stability & rigidity
• Rubberized feet for secure surface grip
• Quick & tool-less replacement of feet
• Foot print of 245 to 300 mm
• 1913 Picatinny Rail compatible

Specifications:

• Weight: 405 g
• Width: 96mm
• Height: 50mm
• Length: 206mm
• Width (open/deployed): 242mm
• Height (open/deployed): 180mm
• Length (open/deployed): 51mm

A single stage press is perfect for both beginners and those who want complete control over the entire process. The Hornady Lock-N-Load Classic Loader delivers both dependability and precision with its uniquely angled, solid cast frame that offers greater visibility and easier access to the cartridge. Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy.

Features:
• Lock-N-Load quick change bushing system - Lock-N-Load bushings not only let you switch from one die to another in a matter of seconds, they also offer the quickest and easiest die setup on the market. Just set the die and tighten the Sure-Loc ring on to the Lock-N-Load® bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.

• Power-Pac linkage and solid steel arms - arms rotate on steel pins that run completely through the cast frame. The Power-Pac linkage design multiplies the leverage you apply to the handle, making it easier to size cases and reduces user fatigue.

• Positive priming system (PPS) - once the spent primer ejects at the top of the stroke, you can add a new primer to the PPS and it self-aligns to feed and insert the primer at the bottom of the stroke where leverage is best. Our self-aligning primer arm also allows for easy manual inserting of primers without having to raise the handle. All the work is done at the bottom of the stroke. Works easier than ram prime units and much better than old style primer arms. Small and large punch included.

• Strong angled frame - this high strength alloy frame offers the rigidity and stability needed for precision reloading, and is guaranteed never to break or fail. The frame's unique angle gives the reloader greater visibility and easier access to the cartridge in the press.

• Easy grip handle - a large, ball-style grip reduces fatigue and the long handle increases leverage and reduces effort.

Negrini Hybrid gun cases are designed with a durable polymer exterior and an ABS Interior cavity. Negrini Hybrid gun cases are fully cushioned compartments and upholstered velvet foam padding. Each gun case is fitted with hardened steel combination locks and hinges. The locks are recessed to prevent them from getting snagged. The Hybrid shotgun case interiors are designed with separate compartments for stock and receiver, barrel and forend as well as accessories. All materials used are certified to not outgas or corrode firearms.

Durable double wall construction consists of injection molded outer case welded to thermoformed inner case with plush velvet cushioning. Double wall construction absorbs maximum shock without breaking. Hinges are steel recessed along with the combination locks to avoid snagging on conveyor belts. Separate compartments for barrel and forend, stock and receiver and chokes and tools. 

Features:

• Fits Over/Under or Side-by-Side shotguns
• Lightweight, Double wall injection molded Polypropylene
• Inside soft touch padded felt
• Hardened steel combination Locks for Security
• Great for car, club, and home!
• Colour: Navy/Navy
• 100% Made in Italy

Specifications:

• Width: 835mm
• Height: 230mm
• Depth: 100mm
• Weight: 2.2kg
• BARREL LENGTH: 30"/780mm + Chokes
• INTERNAL LENGTH: 800mm
• INTERNAL WIDTH: 200mm
• INTERNAL DEPTH: 85mm

Boston Security Hunting Safe 3 Gun A-Category in a black slate matte finish.

Keep your firearms safe and secure. Featuring an electronic locking keypad with a backup key, this safe can comfortably hold 3 guns (plus more depending on the actual size of each firearm). The main door provides a total of 3 heavy-duty steel locking lugs to ensure your investment is protected.

The Boston Security 3 gun safe provides ultra competitive price with ultra tough durability.

Features:
• A-Category compliant gun safe
• 3 Gun capacity (more can be fitted in skillfully)
• Electronic 3-8 digit combination lock with backup key
• Heavy-duty all-steel construction with 2mm Body and a reinforced frame inside the door.
• Door secured with 3 live-action locking bolts
• Powder coated protection
• Removeable storage shelf
• Pre-drilled so it can quickly be secured in place using the included mounting bolts.
• Easy to understand manual included

This safe qualifies for the storage of all standard, or "A-Category" firearms and ammunition.

• Dimensions: 1425mm x 327mm x 342mm
• Weight: 39kg.

5 Gun capacity safe with customizable soft lined shelving included for ammunition, parts, air pistols, knives or even precious metals such as bullion. This safe can be used entirely for firearms or it can be quickly converted with the x4 included shelves for ammunition - the choice is yours! This safe also features an internally lockable compartment making it perfect for securing other small valuables as a 2 way security method.

Shelving is easily installed within minutes via provided brackets - no tools or screws required!

This safe qualifies for the storage of all standard, or "A Category" firearms or ammunition.

Internally padded rack with spaces for 5 guns but more can be fitted in skillfully.

Features:
• Four soft lined shelves
• Lockable inside compartment for extra storage
• Steel construction
• Upgraded twin locking system
• A-Cat compliable (all standard guns)
• Upgraded bars and hinges
• Powder coated protection
• Padded gun rack
• Wall thickness: 1.5mm

Dimensions:
• Height: 1500 mm
• Height from floor to bottom of lockbox: 1350mm
• Width: 350 mm
• Depth: 300 mm
• Weight: 27 kg

Included:
• Gun/ammo safe
• Brackets for shelving
• 2 Pairs of safe keys
• 2 Compartment keys
• 2 Deadbolts for safe

(501095)